Digital Surface Resistivity Meter
The Surface Resistivity Meter measures both surface resistance and resistance to ground. This is meant for use in evaluating a wide variety of ESD protective materials including tablemats, floor mats,
and hard ESD-laminates. It measures and displays Surface Resistivity as well as surface to ground and point-to-point resistances. These measurements can be done in the range of <10E3 to >10E12 ohms by using two 2.5-kilo (5lb) heavy electrodes or through internal probes. To check whether surface Resistivity is in accordance with EOS/ESD Association standards S-4.1.
Digital Display Range : < 1X10E3 to >1X10E12 ohms &ohms/sq
LED Decades Display Range : < 10E3 to > 10E12 ohms & ohms/sq
Digital Measurement accuracy : 0.1 decade
LED Measurement accuracy : 0.5 decade
Digital Display : Alpha Numeric LCD.
LED Display indication : By Different Color LED’s
Open Circuit Voltage : 100V +/- 5%
Battery status indicator : By Dual Color LED.
Test actuation : Press To Read
Power supply : 10.8V Rech-Battery
Dimensions in mm : 210 x 110 x 40mm
Weight : 500 gms
Calibration : calibration recommended once In 12 months.
Warranty : 12 months.
Optional : Testing & measuring probes ESD Audit kit
Accessories : External cable, 12V Charger & Carry Case.